Cisco Systems OL-11497-03 manual Removing the Blower Module

Chapter 6 Maintaining the Router

Removing and Replacing an AC PDU

Step 5 Release the retention clip and disconnect each power supply cord from the PDU (see Figure 6-10).

Step 6 Remove the blower module (Figure 6-12):

a.Lift the blower module handle to its raised (carrying) position.

b.Loosen the (4) captive screws on the blower module.

c.Remove the blower module by grasping it on each side and pulling it straight back from the chassis.

Figure 6-12 Removing the Blower Module

101115

	Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
OL-11497-03		6-27