JVC KD-LH3105 manual Activating the downloaded images and animations, English

7To delete more files, repeat from steps 5 and 6.

8Press D (DISP) to resume the source indication screen.

Activating the downloaded images and animations

Activating the animations stored for opening and ending screens

After the unit turns on or before the unit turns off, you can see preset animations on the display. These are called opening screen and ending screen. You can use your own edited animations for these opening and ending screens.

•Opening and ending screens will not be shown if the “KeyIn CFM” setting is set to “Short” or “Off.” (See page 41.)

•If no animation is stored in “PowerOn” and “PowerOff,” “Opening” and “Ending” cannot be selected as a PSM item.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see pages 39 and 40.)

2 Press number button 1 to select “MOVIE”—Movie category of the PSM settings.

The “Graphics” setting screen appears on the display.

3 Select “Opening” (opening screen setting) or “Ending” (ending screen setting).

Ex.: When you select “Opening”

4 Select “User.”

•Default: Factory-preset animation is used.

•User: Your own edited animation is used.

5 Finish the setting.

Activating the graphic screen using either picture or movie

Using this setting, you can change the graphic displays. These graphic screen appears if no operation is done for about 20 seconds.

•If no image is stored in “Picture,” or no animation in “Movie,” “UserPict.” cannot be selected as a PSM item.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see pages 39 and 40.)

CONTINUED ON THE NEXT PAGE

ENGLISH

37