Cisco Systems OL-11497-03 manual Connecting RP and Line Card Cables

Chapter 3 Installing the Router

Connecting RP and Line Card Cables

Figure 3-6 Crimping the Lug

1

57808

2

1

Place ground wire in the lug

2

Crimp the lug

Note The three threaded inserts that make up the grounding receptacle are set in a triangle so that you can choose any two of the three holes to attach the lug and grounding cable.

Connecting RP and Line Card Cables

To connect RP and line card cables, see Figure 3-7and follow these steps:

Step 1 Attach an ESD-preventive strap to your wrist and connect the leash to the chassis or to another grounded, bare metal surface.

Step 2 Proceeding from left to right, identify the cables that attach to the first RP or line card.

	Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
OL-11497-03		3-11