Cisco Systems OL-11497-03 manual Product Overview Product Description

Chapter 1 Product Overview

Product Description

•All power modules and other field replaceable units (FRUs), except for the air blower module and the power distribution unit (PDU), can be removed from the front of the chassis.

•All source power connections are located at the rear of the chassis on the PDU. (See Figure 1-2.)

•Enhanced models have a new stylish front door that hides router cabling. The door can be installed to open from the right side or left side to give you total flexibility.

•Network Equipment Building Systems—Cisco 12006 and Cisco 12406 routers comply with the Network Equipment Building System (NEBS) Criteria Level 3 requirements defined in SR-3580 for flammability, structural, and electronics compliance.

•Electromagnetic Compatibility and Electrostatic Discharge Compliant— Cisco 12006 and Cisco 12406 routers comply with emissions, immunity, and electrostatic discharge (ESD) standards for both product and packaging.

•Bonding and Grounding—Bonding and grounding for safety, circuit protection, noise currents, reliability, and operations compliance.

•Environmental Monitoring—Cisco 12006 and Cisco 12406 router complies with environmental monitoring standards for operating temperature and humidity, as well as handling temperature and humidity (except for heat dissipation).

•Shock and Vibration—Cisco 12006 and Cisco 12406 routers have been shock- and vibration-tested for operating ranges, handling, and earthquake standards to NEBS (Zone 4 per GR-63-Core). These tests have been conducted in earthquake environment and criteria, office vibration and criteria, transportation vibration and criteria, and packaged equipment shock criteria.

	Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
OL-11497-03		1-5