Cisco Systems OL-11497-03 manual Mbus

Chapter 5 Field Diagnostics for the Cisco 12000 Series Router

FPGA Overview

Loading muckier/award/c12k-fdiagsbflc-mz.conn_isp from 223.255.254.254 (via Ethernet0): !!!!!( stuff deleted)

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[OK - 8452824 bytes]

FD 0> *****************************************************

FD 0> GSR Field Diagnostics V6.14

FD 0> Compiled by award on Mon Sep 22 14:05:20 PDT 2003 FD 0> view: award-conn_isp.Field_Diag_Release

FD 0> *****************************************************

Executing all diagnostic tests in slot 0 (total/indiv. timeout set to 3000/600 sec.)

FD 0> BFR_CARD_TYPE_OC12_4P_ATM_E48 testing...

FD 0> Available test types 2

FD 0>		1
FD 0>		3
FD 0>		11
FD	0> Completed f_diags_board_discovery() (0x2f)
FD	0> Verbosity now (0x00000211) TESTSDISP FATL IDSPRINTF

FD 0> Test list selection received: Test ID 3, Device 0

FD 0> running in slot 0 (1 tests from test list ID 3)

FD 0> Skipping MBUS_FDIAG command from slot 5

FD 0> Just into idle state

FDIAG_STAT_IN_PROGRESS(0): test #1 Pinnacle FPGA Upgrade

FD 0> Same version of IOB FPGA in flash and bundle: rev A0.79

FD 0> IOB FPGA completed

FD 0> MICKEY FPGA completed

FD 0> Same version of MOUSE FPGA in flash and bundle: rev A0.11

FD 0> MOUSE FPGA completed

FD 0> Lower version of SAF FPGA being programmed over flash

bundle: Bundle rev		B0.0A flash rev		B1.10
FD 0> SAF FPGA		completed
FD 0> Magic number indicates first use of this sector in flash for
CPK FPGA
FD 0> WARNING: Not all devices				flashed successfully:
fail_flag=0x0010
FD 0> CPK FPGA		completed
FD 0> Displaying environmental				information
FD 0> 3.3V		5V	MBUS 5V	Hot Sensor	Inlet Sensor
FD 0> (mv)		(mv)	(mv)	(deg C)	(deg C)
FD	0> 3288	2568	5048	45.0	34.5

FDIAG_STAT_DONE(0)

FD 0> Changed current_status to FDIAG_STAT_IDLE

Field Diagnostic ****PASSED**** for slot 0

	Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
OL-11497-03		5-5