Cisco Systems OL-11497-03 manual SDCC1/0

Chapter 3 Installing the Router

				Configuration Changes
Current interface summary
Interface	IP-Address	OK? Method Status		Protocol
Ethernet0	unassigned	YES unset	administratively down down
POS1/0	unassigned	YES unset	administratively down down
SDCC1/0	unassigned	YES unset	administratively down down
POS2/0	unassigned	YES unset	administratively down down
SDCC1/0	unassigned	YES unset	administratively down down
.
.
.
POS15/0	unassigned	YES unset	administratively down down
SDCC15/0	unassigned	YES unset	administratively down down

Enter interface name used to connect to the

management network from the above interface summary: Ethernet0

Configuring interface Ethernet0:

Configure IP on this interface? Yes

IP address for this interface: 172.99.99.2

Subnet mask for this interface: 255.85.89.000

Class B network is 172.88.9.0, 8 subnet bits; mask is /24

The following configuration command script was created:

hostname Router

enable secret 5 $1$krIg$emfYm/1OwHVspDuS8Gy0K1 enable password wilma

line vty 0 4 password charlie no snmp server

!

no ip routing

	!
	interface Ethernet0
	no shutdown
	ip address 172.88.99.2 255.888.255.0
	!
	interface POS1/0
	shutdown
	no ip address
	!
	interface SDCC1/0
	shutdown
	no ip address
	.
	.
	.
	Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
OL-11497-03		3-55