Cisco Systems OL-11497-03 manual Unpacking and Repacking the Router

Chapter 2 Preparing for Installation

Unpacking and Repacking the Router

Most data centers cannot resolve the infrequent but potentially catastrophic problems just described without pulse meters and other special equipment. These problems can cost a great deal of time to identify and resolve, so take precautions by providing a properly grounded and shielded environment, with special attention to issues of electrical surge suppression.

Unpacking and Repacking the Router

The shipping package for Cisco 12000 series routers is engineered to reduce the potential of product damage associated with routine material handling experienced during shipment. To minimize potential damage to the product, transport these products in their Cisco-specified packaging. Failure to do so may result in damage to the router or degradation of its performance. Also, do not remove the Internet router from its shipping container until you are ready to install it. The router should always be transported or stored in an upright position. Keep the router in the shipping container until you have determined where you will install it.

Refer to the unpacking instructions (Cisco 12006 and 12406 Router Unpacking and Repacking Instructions document number 78-16104-xx) that came with the router to unpack it from the shipping pallet and verify the contents. This document also includes instructions to repack the router if you need to transport it.

If you do not receive everything you ordered, contact a customer service representative for assistance. See the section titled, Obtaining Technical Assistance, page -Boilerplate 2.

	Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
OL-11497-03		2-21