Cisco Systems OL-11497-03 manual Bumpers Pivot blocks, Removing the Bumpers and Pivot Blocks

Chapter 6 Maintaining the Router

Removing and Installing the Front Door on Cisco 12006 and Cisco 12406 Enhanced Series Router

Step 4 Remove the bumpers and pivot blocks from the door as shown in Figure 6-3.

Figure 6-3 Removing the Bumpers and Pivot Blocks

2

1

149545

1 Bumpers

2

Pivot blocks

Step 5 Reinstall the hardware to the opposite sides of the front door:

a.Mount pivot blocks to the left side and tighten the screws until snug.

b.Mount the bumpers to the right side and tighten the screws until snug.

	Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
6-6	OL-11497-03