Cisco Systems OL-11497-03 manual Seating the AC Power Supply

Chapter 6 Maintaining the Router

Removing and Replacing an AC PEM

Step 5 Install the new power supply (Figure 6-9):

a.Slide the power supply into the bay until it mates with its backplane connector.

Caution To prevent damage to the power shelf backplane connector, do not use excessive force when inserting the power supply into the chassis.

b.Close the ejector levers and tighten the captive screws to securely seat the power supply to the backplane connector.

Figure 6-9 Seating the AC Power Supply

84373

	Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
OL-11497-03		6-21