Cisco Systems OL-11497-03 manual DC PDU GSR6-DC-PDU=, DC PDU 12000/6-DC-PDU=

Chapter 6 Maintaining the Router

Removing and Replacing AC and DC Power Subsystem Components

Table 6-1	Original and Replacement Components (Continued)
Original Component		Replacement Component
DC Power Supply (PWR-GSR6-DC=)		DC Power Supply (12000/6-DC-PEM=)
Used to replace 1400 W power supplies only.		Used to replace existing power supplies. All power
Do not mix with 1900 W power supplies.		supplies must be 1900 W. Do not mix with 1400 W
		power supplies.
		If you are upgrading 1400 W power supplies to
		newer 1900 W power supplies, you must also
		upgrade to the new DC PDU (12000/6-DC-PDU=)
		Caution Redundancy in 1400 W power systems
			was not a requirement and a blank filler
			(MAS-GSR-PWRBLANK=) was used in
			place of a second power supply to ensure
			EMI compliance. New 1900 W power
			supplies require redundancy...you must
			install two power supplies.
DC PDU (GSR6-DC-PDU=)		DC PDU (12000/6-DC-PDU=)
Compatible only with 1400 W power		Required for 1900 W power supplies.
supplies.

	Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
6-16	OL-11497-03