Chapter 6 Maintaining the Router

Removing and Replacing an AC PEM

Step 3 Check the power supply status indicators:

AC Input (green)—Indicates that the power supply is operating normally, and the source AC voltage is within the nominal operating range of 200 VAC to 240 VAC. This indicator lights when the power supply switch is set to the On

(1) position.

If the AC Input power indicator remains off after checking all of the power sources, replace the power supply with a spare.

If the spare power supply does not work, replace the PDU.

DC Output (green)—Indicates that the power supply is operating normally, and the output DC voltage is within the nominal operating range of –48 VDC to –60 VDC. This indicator lights when the power switch is set to the On (1) position.

If the indicator is off, toggle the power switch off and then on. If the indicator remains off after several attempts to power it on, replace the power supply with a spare.

 

 

Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide

 

 

 

 

 

 

OL-11497-03

 

 

6-23

 

 

 

Page 267
Image 267
Cisco Systems OL-11497-03 manual Maintaining the Router Removing and Replacing an AC PEM