Cisco Systems OL-11497-03 manual Indicates the port is enabled

Chapter 3 Installing the Router

IOS Software Configuration for the Router

Figure 3-24 PRP LEDs

ETH 0

-1 SLOT0 - SLOT

PRIMARY

	RX
EN	TX
LINK

ETH 1

PRIMARY

	RX
EN	TX
LINK

70693

LINK	Indicates link activity
EN	Indicates the port is enabled
TX	Indicates data transmission
RX	Indicates data reception

When you start an unconfigured system for the first time, the console screen displays a system banner and then automatically starts the System Configuration Dialogue. Observe the Cisco IOS banner on the console screen. If a Flash memory card containing a valid Cisco IOS software image is inserted in PCMCIA slot 0 and the software configuration register is set to 0x0102 (the factory default setting), the router automatically boots using this image.

As the router boots the Cisco IOS software image, the console screen displays a system banner similar to the following:

Cisco Internetwork Operating System Software IOS (tm) GS Software (GSR-P-M) 12.0(20020120:204554)

Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Sat 20-Aug-01 18:34

.

.

.

Note The system banner that you see depends on the image version of the

Cisco IOS software that the system is running.

	Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
OL-11497-03		3-45