Cisco Systems OL-11497-03 manual Releasing the DC Power Supply

Chapter 6 Maintaining the Router

Removing and Replacing a DC PEM

Step 3 Remove the power supply from the chassis (Figure 6-17):

a.Loosen the captive screw on each ejector lever.

b.Pivot the levers open to release the power supply from its bay.

c.Slide the power supply out of its bay while supporting it with your other hand.

Warning The power supply weighs approximately 10 lb (4.5 kg). Use two hands to remove the power supply.

Figure 6-17 Releasing the DC Power Supply

OUTPUT
OK	INPUT	M	ISWIRE
	OK

101116

	Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
OL-11497-03		6-33