Chapter 6 Maintaining the Router

Removing and Installing the Chassis

Remove each CSC from its slot in the defective chassis as instructed in the “Removing a Clock and Scheduler Card” section on page 6-58. Immediately install the CSC in the same slot of the replacement chassis as instructed in the “Installing a Clock and Scheduler Card” section on page 6-59.

Remove each SFC from its slot as instructed in the “Removing a Switch Fabric Card” section on page 6-62. Immediately install the SFC in the same slot of the replacement chassis as instructed in the “Installing a Switch Fabric Card” section on page 6-63.

Remove each alarm card from its slot in the defective chassis as instructed in the “Removing an Alarm Card” section on page 6-66. Immediately install the alarm card in the same slot of the replacement chassis as instructed in the “Installing an Alarm Card” section on page 6-66.

Transferring the Power Modules

For systems equipped with AC-input power supplies, remove each power supply as instructed in the “Removing and Replacing an AC PEM” section on page 6-18. Immediately install each PEM in the same bay of the replacement chassis.

For systems equipped with DC-input PEMs, remove each PEM as instructed in the “Removing and Replacing a DC PEM” section on page 6-31. Immediately install each PEM in the same bay of the replacement chassis.

Transferring the Blower Module

Remove the blower module from the chassis as instructed in the “Removing and Replacing the Blower Module” section on page 6-9.

Note Set the blower module safely aside temporarily. You will install it on the replacement chassis in a later procedure.

Transferring the Power Distribution Unit

Follow the instructions in the “Removing and Installing the Chassis” section on page 6-68 to remove the PDU from the defective chassis and install it in the replacement chassis.

 

 

Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide

 

 

 

 

 

 

OL-11497-03

 

 

6-73

 

 

 

Page 317
Image 317
Cisco Systems OL-11497-03 manual Transferring the Power Modules, Transferring the Blower Module