Cisco Systems OL-11497-03 manual Releasing the AC Power Supply

Chapter 6 Maintaining the Router

Removing and Replacing an AC PEM

Step 4 Remove the PEM from the chassis (Figure 6-8):

a.Loosen the captive screw on each ejector lever.

b.Pivot open the levers to eject the power supply.

c.Slide the power supply out of its bay while supporting it with your other hand.

Warning The power supply weighs approximately 14 lb (6.35 kg). Use two hands to remove the power supply.

Figure 6-8 Releasing the AC Power Supply

84372

	Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
6-20	OL-11497-03