Cisco Systems OL-11497-03 manual Captive screws four, Dc Pdu

Chapter 3 Installing the Router

Connecting to a DC Power Source

Figure 3-19 DC PDU

1

POWER B

+

GND

3

5

4

6

2

POWER A

+ GND

57992

1	Captive screws (four)	4	DC PDU
2	DC power connector block (A)	5	Guide pin
3	DC power connector block (B)	6	Blower module connector

To connect source DC power to the DC PDU, see Figure 3-19and Figure 3-20and follow these steps:

Step 1 Attach an ESD-preventive strap to your wrist and connect the leash to the chassis or to another grounded, bare metal surface.

Step 2 Locate the DC PDU on the back of the router. The PDU is positioned directly below and behind the blower module.

	Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
OL-11497-03		3-33