ENGLISH | Voreinstellungen: |
Initial Setting : System Menu Setting | Menü System verwenden |
DEUTSCH
Viewing the Demonstration (Demonstration) |
|
✤ The Demonstration function may only be used in the <Camera> mode without a tape inserted in the Camcorder. ➥page 19
✤ Before you begin: Make Sure that there is no tape inserted in the Camcorder. ➥page 32
✤ Demonstration automatically shows you the major functions that are included with your Camcorder so that you may use them more easily.
✤ The Demonstration operates repeatedly until the
Demonstration mode switched Off.
4
1.Set the [Power] switch to [CAMERA].
2.Set the [Mode] switch to [TAPE].
3.Press the [MENU] button.
■The menu list will appear.
4.Move the [Zoom] lever up or down to select <System>, then press the [OK] button.
5.Move the [Zoom] lever up or down to select <Demonstration>, then press the [OK] button. 6
6.Move the [Zoom] lever up or down to select <On>, then press the [OK] button.
7.Press the [MENU] button.
■The Demonstration will begin.
8.To quit the Demonstration, press the [MENU] button.
[ Notes ]
■The Demonstration function is automatically
activated when the Camcorder is left idle for
more than 10 minutes after switching to the 7 <Camera> mode (if no tape is inserted in the Camcorder)..
■If you press other buttons (FADE, MF/AF, PHOTO, EASY.Q) during the Demonstration mode, the demonstration stops temporarily and resumes 10 minutes later if you do not operate any other functions.
28
| PLAY |
|
1 | ER | |
| A | |
|
| R |
| CAM | E |
|
| |
P |
|
|
LA |
|
|
Y |
| |
E |
| |
R |
| |
| A |
|
E | R |
|
CAM |
|
|
Camera Mode
√System
Clock Set
Remote |
| √On |
|
Beep Sound | √On |
| |
Language |
| √English | |
Demonstration | √On |
| |
ZOOM Move | OK Select | MENU Exit | |
Camera Mode |
|
| |
Back |
|
|
|
Clock Set |
|
|
|
Remote |
|
|
|
Beep Sound |
|
| |
Language |
|
|
|
Demonstration | Off |
| |
|
| On |
|
ZOOM Move | OK Select | MENU Exit |
SAMSUNG Camcorder is...
Demonstration
✤Die
Kassette eingelegt ist und am Camcorder der Modus <Camera> eingestellt wurde. ➥Seite 19
✤Vor dem Start: Stellen Sie sicher, dass sich keine Kassette im Camcorder befindet. ➥Seite 32
✤Die
✤Die Demonstration wird so lange wiederholt, bis Sie die
1.Stellen Sie den Schalter [Power] auf [CAMERA].
2.Stellen Sie den Schalter [Mode] auf [TAPE]. (nur
3.Drücken Sie die Taste [MENU].
■Das Menü wird angezeigt.
4.Bewegen Sie den Regler [Zoom] nach oben oder unten, und wählen Sie <System> aus. Drücken Sie anschließend die Taste [OK].
5.Bewegen Sie den Regler [Zoom] nach oben oder unten, und wählen Sie <Demonstration> (Demo- Funktion) aus. Drücken Sie anschließend die Taste [OK].
6.Bewegen Sie den Regler [Zoom] nach oben oder unten, und wählen Sie <On> (Ein) aus. Drücken Sie anschließend die Taste [OK].
7.Drücken Sie die Taste [MENU].
■Die Demonstration wird gestartet.
8.Drücken Sie die Taste [MENU], um die Demonstration zu beenden.
[ Hinweise ]
■Die
■Wenn Sie bei laufender