ENGLISH | USB Interface | DEUTSCH | |
| |||
(nur |
Using the PC Camera Function
✤This function works only in <Camera> mode. ➥page 19
✤To use the PC Camera function, DV Driver, Video Codec and DirectX 9.0 programs must be installed in the PC.
✤You can use this Camcorder as a PC Camera.
✤When you connect to a Web site that provides video chatting functions, you can use your Camcorder to participate.
✤When using this camcorder for video conferencing (such as Net Meeting), voice communication may not be supported depending on the video conferencing software. In this case, connect an external microphone to the soundcard of the PC to enable voice communication.
✤Using the Camcorder with PC Net Meeting program installed, you can participate in video conference.
✤The PC Camera's screen size (Transferred video frame rate for the PC Camera function is max 15 fps.)
- 640X480 (VGA) pixels for USB 2.0 connection.
✤If PC is connected with the USB to the Camcorder, only the [Power] switch, [Mode] switch, [Zoom]
lever can be operated. | 1 |
1. Set the [Power] switch to [CAMERA].
2. Set the [Mode] switch to [TAPE].
3. Connect one end of the USB cable to the USB jack |
|
on the Camcorder and the other end to the USB | 2 |
connector on your computer. |
PC-Kamerafunktion verwenden
✤ Diese Funktion ist nur im Modus <Camera> verfügbar. ➥Seite 19 ✤ Um die
installiert werden.
✤ Sie können diesen Camcorder auch als
Camcorder für diese Funktionen verwenden.
✤ Beim Einsatz des Camcorders für Videokonferenzen (z. B. mit Net Meeting) wird je nach verwendeter Software eventuell keine Sprachverbindung unterstützt. Schließen Sie in diesem Fall für die Sprachverbindung ein externes Mikrofon an die Soundkarte des Computers an.
✤ Sie können den Camcorder verwenden, um mit Net Meeting an Videokonferenzen teilzunehmen.
✤ Bei der Verwendung als | ||
Wiederholrate von max. 15 Bildern pro Sekunde übertragen. | ||
|
| - Die Auflösung des Bildschirms beträgt in diesem |
| PL | Fall 640 x 480 Pixel (VGA) bei |
| AYE | Verbindungen. |
| R | |
|
| |
| A | ✤ Wenn der Camcorder über den |
| R | |
| CAM E | |
P |
| einem PC verbunden ist, können Sie lediglich die |
|
| |
LA |
| Schalter [Power] und [Mode] und den Regler |
Y | ||
E | ||
R | ||
|
| [Zoom] verwenden. |
| A |
|
E | R |
|
CAM |
|
|
1.Stellen Sie den Schalter [Power] auf [CAMERA].
2.Stellen Sie den Schalter [Mode] auf [TAPE]. (nur
3.Verbinden Sie ein Ende des
93