How to Use (con’t)
SPECIAL FEATURE
This brush features
This appliance is designed to operate on 120/240 volts, 50/60 Hz. It is not intend- ed for commercial use. Hair should be clean, dry or nearly dry, and free of tan- gles before using.
HOW TO USE
For complete styling, hair should be clean, dry and free from dirt, hair spray, creams, etc. (This curling brush can also be used for quick
1.Rest the curling brush on a smooth, flat surface, and plug it in.
2.Press ON/OFF switch, and the power indicator light will flash.
3.Select a temperature according to the type and texture of hair to be styled.
4.With heat control dial set at desired position, allow unit to
THIS CURLING BRUSH CAN ALSO BE USED AS A 3/4” CURLING IRON BY REMOVING THE CURLING BRUSH ATTACHMENT
1.Unplug the unit and let it cool completely.
2.Remove brush attachment by holding the unit firmly by the handle and sliding off Curling Brush.
3.Plug in and let heat.
FOLLOW THE SAME INSTRUCTIONS IN THIS BOOK WHEN USING UNIT AS A CURLING IRON.
HOW TO GET PROFESSIONAL RESULTS WITH YOUR CURLING BRUSH
This unique curling brush has been designed with multiple temperatures, providing very high heat in the Hl
TEST A SMALL SECTION OF HAIR BEFORE USING; THEN ADJUST TEMPERATURE DEPENDING ON TYPE OF HAIR.
HEAT SETTINGS
WARNING
This multiple temperature curling brush has been specially designed to curl very coarse, thick, hard-
•Keep unit away from contact with all skin areas. Do not touch barrel with fingertips.
•For shorter hair, place a thin plastic comb between scalp and curling brush to avoid touching scalp.
•Place fingers of free hand on safety tip when more control is needed
for curling.
•Test small section of hair to determine correct heat setting for the type of hair being styled.
HI
These settings are very hot. Use only if hair is very coarse and highly resistant, but in good condition.
MED/HI
Use heat settings in this range for dense,
MEDIUM
Use heat settings in this range for thick, wavy hair in good condition.
LO/MED (7-12)
Use heat settings in this range for
LO
Use LO heat setting for very fine, fragile, damaged
STYLING
1.Taking one section at a time, use the curling brush to roll hair in the direction of the curl desired, and hold a few seconds.
2.When using as a curling iron, take one sec- tion at a time, lift clamp and place end of hair under the clamp so that it extends a little past the clamp. Release clamp so that it closes over the end of the hair. Roll hair in desired direction and hold for a few seconds.
3.The cool tip can be a great help in winding. Use one hand on the handle and the fingers of the other on the cool tip.
NOTE: To avoid tangling, do not wind hair around the curling brush more than two times.
3.When hair feels warm, the curl is set.
4.Carefully remove curling brush and allow curl to cool without disturbing it.
5.Continue steps
6.When you achieve your desired style, use the hot brush to brush hair into place.
7.Afterward, once all curls have cooled thor- oughly, gently brush and comb hair into the style desired.
STYLING TIPS
■For a Flip, take a 2" section of hair and roll the brush up over the hair.
■For a Curl, take a 2" section of hair and roll the brush under the hair.
■For Volume and Body, roll hair loosely around the brush. Allow hair to cool slightly before brushing.
AUTO-OFF
After approximately one hour, the unit will automatically shut itself off. To reactivate the unit, press ON/OFF switch.
DUAL VOLTAGE USE
This product contains a special electronic circuit. This circuit automatically adjusts to worldwide voltage. When traveling overseas, this product can be plugged into any voltage outlet without your having to adjust the product manually in any way. In some overseas countries, an attachment plug adapter of the proper configuration for the power supply receptacle may be required. DO NOT USE a voltage converter or extension cord with this product.
Maintenance
USER MAINTENANCE
INSTRUCTIONS
1.To clean the unit, be sure it is cool and unplugged. Wipe handle, barrel and curling brush with a damp cloth. No other maintenance is necessary.
2.When not in use, store appliance where it will not become damaged.
Do not wrap cord around appliance.
3.Do not attempt to repair the appliance yourself. Return to Remington Customer Service Center for repair.
STORAGE:
When not in use, unplug the unit. Allow it to cool and store out of reach of children in a safe, dry location.
Never wrap the cord around the appliance as this will cause the cord to wear prema- turely and break. Handle cord carefully and avoid jerking it, twisting or straining it, especially at plug connections.
Use & Care Guide
®
PROTECT&SHINETM
Curling Brush and Iron with 3X Protection
+Ceramic
+Ions
for beautiful, healthy, shiny hair