Beko DPU 7360 GX manual

Page 27

Drum lighting does not turn on. (On models with lamp)

Dryer is not switched on with the On / Off button. >>> Make sure that the dryer is switched on.

Lamp is defective. >>> Call Authorized Service Agent to have the lamp replaced.

End/Anti-creasing symbol is on.

Anti-creasing programme is activated in order to prevent laundry that has remained in the machine from creasing. >>> Turn off the dryer and take out the laundry.

End symbol is on.

Programme is over. Turn off the dryer and take out the laundry.

Lint Filter Cleaning symbol is on.

Lint filter is not cleaned. >>> Clean the lint filter.

Lint Filter Cleaning symbol is flashing.

Filter housing is clogged with lints. >>> Clean the lint filter housing.

A deposit has built up on the lint filter pores that may cause clogging. >>> Wash the lint filter with warm water.

Filter drawer is clogged. >>> Clean the sponge and the filter cloth in the filter drawer.

Water leaks from the loading door

Lint has accumulated on the inner surfaces of the loading door and on the surfaces of the loading door gasket. >>> Clean the inner surfaces of the loading door and the surfaces of the loading door gasket.

Loading door opens spontaneously.

Loading door is ajar. >>> Push the loading door to close until you hear a locking sound.

Water Tank warning symbol is on/flashing.

Water tank is full. >>> Drain the water tank.

Water draining hose is bent. >>> If the product is connected directly to a wastewater drain, check the water drain hose.

Filter Drawer Cleaning warning symbol is flashing.

Filter drawer is not cleaned. >>> Clean the sponge and the filter cloth in the filter drawer.

AIf you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional product yourself.

27

EN

Image 27
Contents Dryer DPU 7360 GX 2960310537EN/051211.1554 Explanation of symbolsGeneral safety Important safety instructionsPage Intended use Childrens safetyUnder counter installation InstallationAppropriate installation location Removing the transportation safety assemblyConnecting to the drain Connecting the water drain hoseMounting over a washing machine Disposing of packaging material Adjusting the feetElectrical connection First useDisposing of the old product Technical specificationsLaundry unsuitable for drying in the machine Preparations for dryingThings to be done for energy saving Laundry suitable for drying in the machineHome articles Weights gPreparing laundry for drying Correct load capacityLoading the laundry Control panel Selecting a Programme and Operating Your MachineAdditional programmes Preparing the machineProgramme selection Main programmesMixed Timer programmesShirt JeansProgramme selection and consumption table Auxiliary functions Time Delay Changing the delay timeCancelling the Time Delay Changing the programme after it has started Starting the programmeProgress of programme Child-proof LockAdding / removing laundry in Pause mode Canceling the programmeEnd of programme Maintenance and cleaning Cleaning the sensorsLint Filter / Loading Door Inner Surface Draining the water tank Cleaning the filter drawerPage Cleaning the evaporator Troubleshooting