1.If you want to select Extra Dry programme instead of Iron Dry programme, press and hold the
Start / Pause / Cancel button for 3 seconds to cancel the programme.
2.Select Extra Dry programme by turning the Programme Selection knob.
3.Press Start / Pause / Cancel button
C to start the programme.You can also select a new
programme by turning the Programme Selection knob while the machine is operating. In this case, current programme is aborted and the new programme information appears on the display.
Adding / removing laundry in Pause mode
In order to add or take out laundry after the drying programme has started:
1. Press Start / Pause / Cancel button
to switch the machine to Pause mode. Drying process will stop.
2. While in Pause mode, open the loading door, add or take out laundry and close the loading door.
3. Press Start / Pause / Cancel button to start the programme.
C Any laundry added after the drying process has started may cause the clothes that are already dried in the machine intermingle with wet clothes and the result will be wet laundry after the drying process is over.
C You may repeat laundry adding or removing process as many times as you desire during drying.
However, this process will increase the programme time and energy consumption since the drying process will be interrupted repeatedly. Therefore, it is recommended to add laundry before the drying programme has started.
C If you select a new programme by turning the Programme Selection knob while your machine is in Pause mode, then the current program
is aborted and new programme information is displayed.
Do not touch the inner surface of the drum when adding or taking out laundry while a programme is running. Surfaces of the drum are hot.
Canceling the programme
If you want to stop drying and cancel the programme for any reason after the machine has started to run, press and hold the Start / Pause / Cancel button for 3 seconds. Lint Filter Cleaning and Water Tank warning symbols light up and "End" label appears on the display as a reminder at the end of this period.
AAs the inside of the machine will be excessively hot when you cancel the programme while the machine is running, activate the ventilation program to cool it down.
C Machine will stop if you turn the Programme Selection knob while it is operating. In this case, current programme is aborted and the new programme information appears on
20 EN