Beko DPU 7360 GX manual

Page 24

2.Remove the filter drawer cover by turning it in the direction of arrow.

3. Pull out the filter drawer.

4.Open the filter drawer by pressing the red button.

5. Take out the filter drawer sponge.

6.Clean lint, fibre, and cotton raveling on the filter cloth by hand or with a soft piece of cloth.

C When you notice a layer that may lead clogging on filter cloth, please clean the layer by washing in warm water. Let the filter cloth dry thoroughly before installing back the filter drawer.

7. Hand-wash the filter drawer’s sponge to remove hair and lint on it. Squeeze the sponge by hand to remove excessive water.

C It is not necessary to clean the sponge if lint and fibre accumulation on it is not significant.

8. Place the sponge back into its place.

9.Close the filter drawer as to lock the red button.

Image 24

Contents Dryer DPU 7360 GX Explanation of symbols 2960310537EN/051211.1554Important safety instructions General safetyPage Childrens safety Intended useInstallation Appropriate installation locationRemoving the transportation safety assembly Under counter installationConnecting to the drain Connecting the water drain hoseMounting over a washing machine Adjusting the feet Electrical connectionFirst use Disposing of packaging materialTechnical specifications Disposing of the old productPreparations for drying Things to be done for energy savingLaundry suitable for drying in the machine Laundry unsuitable for drying in the machineWeights g Preparing laundry for dryingCorrect load capacity Home articlesLoading the laundry Selecting a Programme and Operating Your Machine Control panelPreparing the machine Programme selectionMain programmes Additional programmesTimer programmes ShirtJeans MixedProgramme selection and consumption table Auxiliary functions Time Delay Changing the delay timeCancelling the Time Delay Starting the programme Progress of programmeChild-proof Lock Changing the programme after it has startedCanceling the programme Adding / removing laundry in Pause modeEnd of programme Maintenance and cleaning Cleaning the sensorsLint Filter / Loading Door Inner Surface Cleaning the filter drawer Draining the water tankPage Cleaning the evaporator Troubleshooting