Beko DPU 7360 GX manual Mounting over a washing machine, Connecting to the drain

Page 7

AWhile using undercounter dryer, it should never be operated without undercounter installation part.

Dryer Depth

60 cm

54 cm

 

 

 

Stock

 

 

number of

 

 

under-bench

2979600100

2973600100

installation

 

 

part

 

 

 

 

 

Leave at least 3 cm of space around the sides and the rear wall of the product when installing it under a counter or in a cupboard.

Mounting over a washing machine

A fixing device should be used between the two machines when installing the dryer above a washing machine. The fixing device

(2977200100 white/2977200400 grey) must be installed by the Authorized Service Agent.

Total weight of the washing machine and the dryer -with full load- when they are placed on top of each other reaches to approx. 180 kilograms. Place the products on a solid floor that has sufficient load carrying capacity!

Connecting to the drain

In products equipped with condenser unit, water accumulates in the water tank during the drying cycle. You should drain accumulated water after each drying cycle.

You can directly drain accumulated water through the water drain hose supplied with the product instead of periodically draining the water collected in the water tank.

Connecting the water drain hose

1. Pull hose in the product by hand in order to disconnect it from where it is connected. Do not use any tools to remove the hose.

2. Connect one end of the drain hose supplied separately with the product to the connection point from where you removed the hose of the product in previous step.

3. Connect the other end of the drain hose directly to the wastewater drain or to the washbasin.

AHose must be fixed in every type of connection. Your house will be flooded if the hose comes loose during water discharge.

C Water drain hose should be attached

7 EN

Image 7
Contents Dryer DPU 7360 GX 2960310537EN/051211.1554 Explanation of symbolsGeneral safety Important safety instructionsPage Intended use Childrens safetyUnder counter installation InstallationAppropriate installation location Removing the transportation safety assemblyConnecting the water drain hose Connecting to the drainMounting over a washing machine Disposing of packaging material Adjusting the feetElectrical connection First useDisposing of the old product Technical specificationsLaundry unsuitable for drying in the machine Preparations for dryingThings to be done for energy saving Laundry suitable for drying in the machineHome articles Weights gPreparing laundry for drying Correct load capacityLoading the laundry Control panel Selecting a Programme and Operating Your MachineAdditional programmes Preparing the machineProgramme selection Main programmesMixed Timer programmesShirt JeansProgramme selection and consumption table Auxiliary functions Changing the delay time Time DelayCancelling the Time Delay Changing the programme after it has started Starting the programmeProgress of programme Child-proof LockAdding / removing laundry in Pause mode Canceling the programmeEnd of programme Cleaning the sensors Maintenance and cleaningLint Filter / Loading Door Inner Surface Draining the water tank Cleaning the filter drawerPage Cleaning the evaporator Troubleshooting