to a height of maximum 80 cm.
C Make sure that the water drain hose is not stepped on and it is not folded between the drain and the machine.
Adjusting the feet
In order to ensure that the product operates more silently and
Turn the feet to left or right until the machine stands level and firmly.
C Never remove the adjustable feet from their housings.
Electrical connection
Connect the product to a grounded outlet protected by a fuse complying with the values in the "Technical specifications" table. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.
•Connection must comply with national regulations.
•Power cable plug must be within easy reach after installation.
•The voltage and allowed fuse or breaker protection are specified in the “Technical specifications” section. If the current value of the fuse or breaker in the house is less than 10
Amps, have a qualified electrician install a 10 Amp fuse.
•The specified voltage must be equal to your mains voltage.
•Do not make connections via extension cables or
•The main fuse and switches must
have a contact distance of minimum 3 mm.
BDamaged power cable must be replaced by the Authorized Service Agent.
BIf the product is faulty, it must not be operated unless it is repaired! There is the risk of electric shock!
First use
Before starting to use the product, make sure that all preparations are made in accordance with the instructions in sections "Important safety instructions" and "Installation".
Disposing of packaging material
Packaging materials are dangerous to children. Keep packaging materials in a safe place away from reach of the children.
Packaging materials of the product are manufactured from recyclable materials. Dispose of them properly and sort
in accordance with recycled waste instructions. Do not dispose of them with normal domestic waste.
Transportation of the product
1. Unplug the product before transporting it.
2. Remove the water drain (if any) and chimney connections.
3. Drain the water in the product completely.
AWe recommend carrying the product in upright position. If it is not possible to carry the machine in the upright position, we recommend carrying
it by tilting towards the right side when looked from the front. After the product is moved to its new place, you should wait for 12 hours before starting it.
8EN