Starting the programme, Progress of programme

Starting the programme

Press Start / Pause / Cancel button to start the programme.

Start / Pause symbol will light up to indicate that the programme has started and ":" symbol between the remaining time will continue flashing.

Progress of programme





Drying		Wardrobe		Anti-
		(Extra)		creasing
	Iron		Ventilation

Progress of a running programme is indicated on the display by means of a set of symbols.

At the beginning of each programme step, the relevant symbol in the series of symbols will light up and thus, at the end of the programme, all symbols will remain lit up. The rightmost symbol on the display indicates the step being carried out.

Drying

Drying symbol lights up in all programmes apart from ventilation.

Iron Dry

Starts to illuminate when the dryness level reach Iron Dry step.

Cupboard dry

Starts to illuminate when the dryness level reach Wardrobe Dry step.

Extra dry

Starts to illuminate when the dryness level reach Wardrobe Dry Extra step.

Ventilation

Ventilation symbol illuminates when the programme comes to an end.

C Anti-creasing symbol will illuminate at the end of the programme if Anti- creasing function is activated.

Child-proof Lock

Machine is equipped with a Childproof Lock which prevents interfering with the current programme flow by pressing any button. All buttons except the On

/Off button on the control panel are deactivated when the Child-proof Lock is active.

In order to activate the Childproof Lock, press Audio Warning and Anti-Creasing buttons simultaneously for 3 seconds.

To start a new programme after the current programme is over or to interrupt the current programme, the Child-proof

Lock should be deactivated. Press the same buttons for 3 seconds again to

deactivate the Child-proof Lock. C Lock symbol will appear on the

display when the Child-proof Lock is activated.

C Child-proof Lock is deactivated when the machine is switched off and on with On / Off button.

When the Child-proof Lock is activated:

•Display symbols will not change even if the position of Programme Selection knob is changed while the machine is running or in halt.

•If the Child-proof Lock is deactivated after changing the position of

the Programme Selection knob while the machine is running, the machine stops and new programme information is displayed.

Changing the programme after it has started

After the machine starts, you can change the selected programme and dry your laundry in a different programme.