| GENERAL INFORMATION |
ELECTRICAL | 220 VAC 50/60 HZ |
REQUIREMENTS | 20 AMP DEDICATED LINE |
| NEMA L620R RECEPTACLE |
IMPORTANT | The use of heat to accelerate drying may require more frequent |
INFORMATION | lubrication and/or use of a high temperature lubricant in the delivery of |
| the press. Please consult your press manufacturer for specific recom- |
| mendations. |
SAFETY | The Tempest® Dryer contains high voltage and hot surfaces. Never |
INFORMATION | attempt to service or work on the unit unless the power is shut off and |
| the unit is cool. |
| Visually inspect the thermistors (Barn |
| ranged in a honeycombed pattern on the underside of the unit) weekly. |
| Ifathermistorisdamagedorcracked,donotoperatethedryer.Contact |
| Accel immediately for a replacement part. |
| The fans should be turned on and set at the lowest speed ("0" on the |
| dial) when running spray powder only without heat. This prevents |
| spray powder from accumulating in the thermistors and housings. |
TERMINOLOGY | OPS = Operator's Side |
| NOPS = Non Operator's Side |
3