Accel 3302 manual Installation

Page 9

INSTALLATION

4

5

Remove the chain guide (subject arrow) at the OPS & NOPS sides of the press.

Install the mounting bracket and new chain guide using M5 X 16MM cap head bolts and lock washers (subject arrow) as shown at the OPS & NOPS. Leave the bolts loose so the position of the dryer can be moved up and down. The bolts thread into the same holes that held the original chain guides.

9

Image 9
Contents Tempest Hot Air Drying System Technical General InformationElectrical SafetyRequirements InformationHOT AIR VS Infrared What Makes Tempest Work HOW Drying is Accomplished with Tempest Page Installation Page Installation Page Installation Page Installation Page Installation Page Installation Page Installation Page Installation HOW Tempest Works TempestOperation Normal Operation Initial SettingsFactors That Effect Drying MaintenanceSafety Requirements Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Indian Trail, Dallas, TX 75229 Phone 972-484-6808, Fax