www.vxitech.com
5.Locate the slide hardware kit provided. Install the rack flanges to the slides as required by the application using the hardware in the kit. Note that the screws are inserted from the inside of the slides and the nuts would show on the outside.
6.Install the slides to the mounting brackets already installed on the chassis using the provided hardware.
Slide Bracket, Top
1/4” Pan Head
Phillips Screw (x3)
Slide Bracket, Bottom
1/4” Pan Head
Phillips Screw (x3)
Rack Mount Slide (20” or 24”) Hardware Kit
3/8” Pan Head Phillips Screws (x6)
Slide Bracket, Front (x2)
3/8” Undercut Flathead Phillips Screws (x4)
* Recessed rack slide configuration shown
FIGURE 2.3: RACK SLIDE INSTALLATION DIAGRAM
25 |