Keeping your shaver in top shape, Automated cleaning

Tips for the perfect shave

•It can take 14-21 days for your beard to adjust to the new shaving system.

•We recommend that you shave before washing, as the skin tends to be slightly swollen after washing.

•Hold the shaver at right angles (90°) to the skin.

•Stretch your skin and shave against the direction of beard growth.

•Replace the shaver foil and cutter block every

18 months, or when the parts are worn, to ensure optimum shaving performance.

Keeping your shaver in top shape

Automated cleaning

The Braun Clean&Charge takes care of all cleaning and lubrication needs of your shaver. Please refer to the separate use instructions.

Manual cleaning

For easy cleaning after each shave, switch the shaver off. Press the release buttons to lift the shaver foil (do not remove the foil completely). Switch on the shaver for approx. 5-10 seconds so that the shaved stubbles can fall out.

For a thorough cleaning (weekly), remove the shaver foil and tap it out on a ﬂat surface. Using the brush, clean the cutter block and the inner area of the pivoting head. About every four weeks, clean the cutter block with Braun cleaning agents.

If your skin is very dry and you notice a reduced opera- tion time of the shaver apply a drop of light machine oil onto the shaver foil.

Replacing the shaving parts

The shaver foil and cutter block are precision parts that, in time, are subject to wear. Replace your foil and cutter block every 18 months and get a 25 % better shave.* (Shaver foil and cutter block: part No. 7000)

(* Overall evaluation from Braun users comparing their shave with new parts and those used for 18 months.)