Description of Oral-B Triumph, Connecting and charging

B-Oral

12 h

Full Charge

Description of Oral-B Triumph

aOral-B FlossAction brushhead

bOn/off button

cBrushing mode button

dHandle

eSmartDisplay

fSmartPlug charger (includes charging ring and SmartPlug)

gBase plate

hBase station

iProtective cover

jOral-B®PowerPolisher™ brushhead (not with all models)

Connecting and charging

Oral-B Triumph has a waterproof handle, is electrically safe and is designed for use in the bathroom.

To assemble the base station (h) as a charging unit, detach the base plate (g) first (1, page 3). Place the charging ring into the base station and attach the base plate as shown (2 and

3, page 3). Then insert the protective cover (i) on the back of your base station (see diagram 4, page 3).

•Plug the SmartPlug into an electrical outlet and place the toothbrush handle (d) on the charging unit. Alternatively, Oral-B Triumph can be charged by placing the handle directly into the charging ring while the SmartPlug is plugged in.

•A battery symbol should appear in the SmartDisplay. The battery symbol will fill up while the handle is being charged and «Charging» will be displayed. When the handle is fully charged, the SmartDisplay shows «Full Charge». A full charge takes at least 12 hours and enables approximately two weeks of regular brushing.

Please note: If the battery symbol is not displayed immediately, continue charging. It will appear in 10 - 15 minutes.

•When the rechargeable battery is low, the bars of the battery symbol will disappear and «Low» will be displayed. Your toothbrush will slow down and then stop. It is time to recharge Oral-B Triumph. When the battery is fully discharged, «Empty» is displayed. It will then need a

15-minute charge before you can use it for a 2-minute brushing.