Panasonic SA-XR59 manual Using the remote control with other equipment, Equipment

Using the remote control with other equipment

Point the remote control at the equipment you want to operate.

RECEIVER AV

SYSTEM		RECORDER
	TV
		DVD
TUNER		PLAYER
CD	VCR	BD/DVD
BAND		ANALOG 6CH

CH

DVD recorder/DVD player

To switch the unit’s input	RECORDER		PLAYER
to “DVR” or “DVD”/To	DVD		BD/DVD
switch the remote control	Do this before trying to operate the		ANALOG 6CH
to the DVD recorder or		Do this before trying to operate the
DVD player operation	DVD recorder.	DVD player.
mode

ENGLISH

	VOLUME
DIRECT	0
TUNING
DISC	-/--
SKIP	SLOW/SEARCH
STOP	PAUSE PLAY
DRIVE SELECT	MANUAL SKIP

To switch the DVD	AV
	SYSTEM
recorder/DVD player on
or off

To skip a track or chapter

SKIP

To confirm selection of an item

For selecting tracks and chapters directly

ENTER

equipment

							NETOUCH PL
			N	U			O	AY
	M	E				R
					O
									F
									U
P				T
				A					N
O				G					C
T			I						T
			V
			A						I
		N					ENTER		O
		T
									N
	C
	E								S
		R
		I
		D
SUB MENU									RETURN
			OFF				SUBWOOFER	DIMMER	TV
							LEVEL	EFFECT	VOL

Before using this remote control with a Panasonic DVD recorder

You may need to change the code in the remote control to match the remote control mode of the DVD recorder.

Preparation: Check the remote control mode of your DVD recorder. Read its operating instructions for details.

1.Press [DVD RECORDER].

2.While pressing [ENTER], press and hold [1],

[2], or [3] for about 2 seconds.

•The remote control code switches to 1, 2, or 3, depending on which numbered button you pressed.

•The factory setting is “1”.

If you are unable to switch the drives on the DVD recorder The DVD recorder is not responding to the signal from the remote control.

Do the following to change the signal, then try switching drives again.

1.Press [DVD RECORDER].

2.While pressing [ENTER], press and hold [8] for about 2 seconds.

To search through the disc

Slow-motion

To start play

To show the direct navigator or top menu

To show sub menus

To show the FUNCTIONS window (while stopped)

To return to the previous screen

To navigate through menus

To specify a disc (5-disc changer only) (For DVD player only)

Note

SLOW/SEARCH

PAUSE

SLOW/SEARCH

PLAY

	M E	N	U	O R
P			T
			A
O			IG
T			V
		A
		N
	T
	C
	E
	R
		I
		D
SUB MENU
				F
				U
				N
				C
				T
				I
				O
				N
				S

RETURN

Use these buttons to select items after pressing [DIRECT NAVIGATOR, TOP MENU], [S, SUB MENU], or [FUNCTIONS].

DIRECT

TUNING

DISC

To pause

Frame-by-frame

To skip ahead 30 seconds (For DVD recorder only)

To switch the DVD recorder’s drive (HDD, disc, and SD) (For DVD recorder only)

Select the channel (For DVD recorder only)

To stop play

0

-/--

You may have to then press [ENTER] on some models.

PAUSE

PAUSE

MANUAL SKIP

DRIVE SELECT

To change channels sequentially

CH

To select a channel directly

0

-/--

STOP

Using the remote control with other

To restore the original signal:

In step 2, while pressing [ENTER], press and hold [9] for about 2 seconds.

[FUNCTIONS] activates display functions on some of the Panasonic DVD players.

RQTV0247

35