Panasonic SA-XR59 manual Specifications DIN 45, Specifications/Help messages English

Specifications (DIN 45 500)

Specifications/Help messages ENGLISH

AMPLIFIER SECTION

Power output (at AC 230 to 240 V)
DIN 1 kHz (T.H.D. 1 %)	2 x 125 W (4 Ω)
20 Hz to 20 kHz continuous power output
both channel driven	2 x 80 W (6 Ω)
Total harmonic distortion
rated power at 20 Hz to 20 kHz	0.09 % (6 Ω)
Power bandwidth
both channel driven, -3 dB	4 Hz to 88 kHz (6 Ω, 0.9 %)
Power output each channel driven (at AC 230 to 240 V)
DIN 1 kHz (T.H.D. 1 %)
Front (L/R)	100 W (6 Ω)
Center	100 W (6 Ω)
Surround (L/R)	100 W (6 Ω)
Surround Back (L/R)	100 W (6 Ω)
Load impedance
Front (L/R)
A or B	4 Ω to 16 Ω
A and B	6 Ω to 16 Ω
BI-WIRE	4 Ω to 16 Ω
Center	6 Ω to 16 Ω
Surround (L/R)	6 Ω to 16 Ω
Surround Back (L/R)	6 Ω to 16 Ω
Frequency response
CD, BD/DVD, DVD Recorder, VCR, TV/STB, AUX	4 Hz to 88 kHz, ±3 dB
DVD 6CH	4 Hz to 44 kHz, ±3 dB
Input sensitivity and impedance
CD, BD/DVD/DVD 6CH, DVD Recorder, VCR, TV/STB, AUX 200 mV/22 kΩ

S/N at rated power (6 Ω)

CD, TV/STB, BD/DVD PLAYER, DVD Recorder (Digital input)

		90 dB (IHF, A: 103 dB)
Tone controls
BASS		50 Hz, +10 dB to -10 dB
TREBLE		20 kHz, +10 dB to -10 dB
Channel balance (250 Hz to 6.3 kHz)		±1 dB
Channel separation		55 dB
Subwoofer frequency response (-6 dB)		7 Hz to 200 Hz
Digital input	(OPTICAL)	2
	(COAXIAL)	2
HDMI (Version 1.2a)	Input	2
	Output	1
FM TUNER SECTION
Frequency range		87.50 MHz to 108.00 MHz
Sensitivity
S/N 30 dB		1.5 µV/75 Ω
S/N 26 dB		1.3 µV/75 Ω
S/N 20 dB		1.2 µV/75 Ω
IHF usable sensitivity (IHF ’58)		1.5 µV/75 Ω

Help messages

IHF 46 dB stereo quieting sensitivity	22 µV/75 Ω
Total harmonic distortion
MONO	0.2 %
STEREO	0.3 %
S/N
MONO	60 dB
STEREO	58 dB
Frequency response	20 Hz to 15 kHz, +1 dB, -2 dB
Alternate channel selectivity	±400 kHz, 65 dB
Capture ratio	1.5 dB
Image rejection at 98 MHz	40 dB
IF rejection at 98 MHz	70 dB
Spurious response rejection at 98 MHz	70 dB
AM suppression	50 dB
Stereo separation	40 dB
Carrier leak	19 kHz, -30 dB
	38 kHz, -50 dB
Channel balance (250 Hz to 6.3 kHz)	±1.5 dB
Limiting point	1.2 µV
Bandwidth
IF amplifier	180 kHz
FM demodulator	1000 kHz
Antenna terminal	75 Ω (unbalanced)
AM TUNER SECTION
Frequency range	522 kHz to 1611 kHz (9 kHz steps)
	530 kHz to 1620 kHz (10 kHz steps)
Sensitivity	20 µV, 330 µV/m
Selectivity (at 999 kHz)	55 dB
IF rejection (at 999 kHz)	50 dB
VIDEO SECTION
Output voltage at 1 V input (unbalanced)	1± 0.1 Vp-p
Maximum input voltage	1.5 Vp-p
Input/output impedance	75 Ω (unbalanced)
S-Video
Input	DVD, DVD Recorder, TV/STB
Output	TV MONITOR
Component Video
Input	DVD Recorder, TV/STB
Output	TV MONITOR
GENERAL
Power supply	AC 230 to 240 V, 50 Hz
Power consumption	140 W
Dimensions (W x H x D)	430 mm x 107.5 mm x 390 mm
Mass	4.7 kg
Power consumption in standby mode:	0.9 W
Power consumption in HDMI off mode:	0.35 W

Notes:

1.Specifications are subject to change without notice.

2.Mass and dimensions are approximate.

3.Total harmonic distortion is measured by the digital spectrum analyzer.

RQTV0247

38

Message	Causes and solutions
	Muting is on.
	Press [MUTING] on the remote control to cancel (➡ page 31).
	You are trying to use a feature that is available only in “MUSIC” mode.
	Change the mode to “MUSIC” (➡ pages 22 to 23).
	Center and surround speakers are not connected, or they are set as absent.
	Connect the speakers (➡ page 13) or change their setting to present (➡ page 27).
	Surround and surround back speakers are not connected, or they are set as
	absent. Connect the speakers (➡ page 13) or change their setting to present
	(➡ page 27).
	Surround back speakers are not connected, or they are set as absent. Connect
	the speakers (➡ page 13) or change their setting to present (➡ page 27).
	You are trying to use an effect unavailable with DTS-ES sources.
	You are trying to use an effect unavailable with DVD-Audio sources.
	You are trying to use an effect unavailable with DVD analogue 6-channel input.
	You are trying to use an effect unavailable with the current input source.
(flashing)	You have set the “PCM FIX” mode. Cancel this mode (➡ page 28).
	SPEAKERS A is off. Press [SPEAKERS A] to turn on “SPEAKERS A” (➡ page
	18).
	SPEAKERS A and SPEAKERS B are off. Select one of the speakers (➡ page
	18).