English
Every two months: shaving heads
1 |
2 |
2 |
1 |
3 |
2 |
1 |
4 |
Switch off the shaver, remove the mains plug from the wall socket and pull the appliance plug out of the shaver.
Press the release button (1) and remove the shaving unit (2).
Turn the wheel anticlockwise (1) and remove the retaining frame (2).
Remove the cutters and guards and clean them with the brush supplied.
Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored.
5 Clean the cutter with the
Brush carefully in the direction of the arrow.
6 Brush the guard.