Philips 8895XL Charging Stand Clock, To set time, Before first use, To replace clock battery

8894_95XLDFUwspanish.qxd 5/28/04 10:21 AM Page 14

14ENGLISH

◗The block display in the charge meter indicates how much power is left in the battery.

Charging Stand Clock

To set time

ENGLISH 15

C 2	Remove battery cover and then use a flat-
	bladed screwdriver to lift out the battery.
C 3	Replace battery with 1.5V button cell
	watch battery, placing rounded side of

C

1

2

1

Turn clock module, located on underside of stand, counterclockwise to remove from stand.

battery into battery compartment, flat side

(+) facing out. Replace battery cover.

C

2

Press small, left button to set correct time.

	C
2	1

4Replace clock module into stand and turn clockwise to secure in place.

Before first use

	C
2	1

3

Replace clock module into underside of stand.Turn clockwise to secure in place.

◗Charge the razor before you start using it (see ‘Charging’).

◗Remove any sticker or protective foil from the LED Display.

Important

To replace clock battery

C 1	Turn clock module counterclockwise and
	remove from stand.
1
2

◗Only use the power plug and/or charging stand provided to charge the razor.

◗The charging plug transforms 100 – 240V AC to 12V DC.