22ENGLISH
Trimming | |
To groom sideburns and moustache: | |
1 | Turn razor ON. |
C 2 | Push down |
The trimmer can be activated while the razor is | |
running. | |
C 3 | Hold trimmer as shown and move in |
| downward strokes with gentle pressure. |
C 4 | Close trimmer by pressing trimmer down. |
5 Turn razor OFF.
Cleaning
C ◗ The tap symbol on the back of the razor indicates that the razor can be rinsed under running tap water.
◗Regular cleaning guarantees better shaving results.
◗Always switch Razor OFF, unplug and remove power cord before cleaning.
◗Never clean, remove or replace head assembly while motor is on.
◗Do not apply pressure to combs. Do not touch razor heads with hard objects as this may dent or damage
ENGLISH 23
◗Do not use razor if combs are damaged or broken. Facial injury may occur.
◗Unplug the charging stand. The charging stand may be wiped clean using a damp cloth.
C 1 The faucet symbol will start blinking after each shave to remind you that the razor needs to be cleaned.
Cleaning: Razor Heads
The easiest and most hygienic way to clean the razor heads is to rinse them after each use or at least once a week with hot water: Water from the tap should be on a hot setting, BUT BE CAREFUL TO TEST WATER FIRST SO AS NOT TO BURN OR SCALD HANDS.
◗ Regular cleaning guarantees better shaving results.
◗ Do not immerse razor in water.
|
|
|
| 1 | Always turn razor OFF, unplug from outlet | |
|
|
|
|
| and remove cord from razor or charging | |
|
|
|
|
| stand before cleaning. | |
|
|
| C |
| Press the Razor Head Release Button, flip | |
2 | ||||||
|
|
| C |
| open the Razor Head Assembly. | |
|
|
|
| Clean inside razor heads and hair chamber | ||
|
|
|
| |||
3 | ||||||
|
|
| ||||
|
|
|
|
| by running under hot water. | |
|
|
|
|
|
|