Philips DR-6050 After Each Use Trimmer, Replacing the razor heads, Razor head check indication

Page 14

26ENGLISH

C 9

Press down (1) and turn wheel clockwise

 

(2) until it locks into place.

10

Close the Razor Head Assembly.

Once A Month: Razor Heads

For optimum performance, razor cutters and combs should be cleaned in a degreasing liquid (e.g. Philips Norelco Razor Cleaner, model RC1776, or rubbing alcohol) and lubricated with Philips Norelco Razor Lubricant, model AL80, or one drop of mineral oil (in the center of the head). This helps prevent wear of the shaving heads.

After Each Use: Trimmer

1Turn razor OFF.

2

Push down spring-release trimmer switch.

C 3

Clean trimmer with the brush every time

 

you use it.

C 4

Lubricate the trimmer teeth with Philips

 

Norelco Razor Lubricant (model AL80) or

 

with one drop of mineral oil every 6

 

months.

5Close trimmer by pressing trimmer down.

This razor has no other user-serviceable parts.

Any other service should be performed by the

Philips Norelco Service Location.

ENGLISH 27

Replacing the razor heads

Replace the razor heads once a year for optimal shaving results.

Replace damaged or worn razor heads with model HQ9 Philips Norelco razor heads only.

Razor head check indication

The replacement head indicator symbol starts blinking to remind you to check if it’s time to replace your razor heads to obtain optimal shaving results.

Storage

C The razor can be placed in the charging stand for safe storage. If storing razor in stand, remove the plug from outlet as soon as the razor is fully charged.

 

Be sure razor is turned off. Remove cord from

 

outlet and razor or charging stand before

 

storing in a safe, dry location where it will not

 

be crushed, banged, or subject to damage.

 

Do not wrap cord around razor or charging

 

stand when storing.

 

Store cord in a safe location where it will not

 

be cut or damaged.

 

Do not keep razor or charging stand

 

permanently plugged into outlet.

 

Do not place or store razor or charging stand

 

where it can fall or be pulled into a tub or

C

sink, water or other liquid while plugged in.

Put the Protective Razor Head Cap on razor

 

to protect heads.

Image 14
Contents 9170XL 9170XL Save These Instructions Table of Contents Full 2-Year Warranty Day Money-Back Guarantee FeaturesAutomatic Cleaning Indicator Easy Read LCD DisplayDisplay provides the following information Battery DisplayEasy Read LCD Display LCD DisplaySeconds Battery Empty Demonstration ProgramCharging Stand Clock To replace clock batteryCharge Meter To set timePlacing or removing razor from charging stand Before First UseCharging Charging plug converts 100 240V AC to less than 24V DCPut It To The Test & Shaving Tips RechargingQuick Charge Personal Comfort Control How To Shave With An Electric Razor Beard growth using both straight Circular movementsTrimming CleaningCleaning Razor Heads Once a Month Razor Heads Razor head check indication After Each Use TrimmerReplacing the razor heads StorageTravel Lock AccessoriesReplacement Heads AssistanceFull TWO Year Warranty