Philips DR-6050 manual Charge Meter, Charging Stand Clock, To set time, To replace clock battery

14ENGLISH

Charge Meter

◗Charge Meter monitors amount of remaining battery power and actual remaining shaving minutes available. ‘Minutes Left’ is based on the amount of power consumed shaving per minute and is dependent upon your skin and beard type, whether you use pre-shave lotion, and how often the trimmer is used.

◗Initially your razor may need to go through 2 or 3 full charge/recharge cycles before “Minutes Left” indicator (numeric or battery) begins to display your accurate“Shaving Minutes Left.”

Charging Stand Clock

To set time

C 1	Turn clock module, located on underside
	of stand, counterclockwise (1) to remove
1	from stand (2).
2
C 2	Press small, left button to set correct time.
	The clock can only be set forward.

		ENGLISH 15
	C 3	Replace clock module into underside of
		stand(1). Turn clockwise to secure in
2	1	place (2).
	To replace clock battery
	C 1	Turn clock module counterclockwise (1)
		and remove from stand (2).
1
	2

	C 2	Remove battery cover and then use a flat-
		bladed screwdriver to lift out the battery.
	C 3	Replace battery with 1.5V button cell
		watch battery, placing rounded side of
		battery into battery compartment, flat side
		(+) facing out. Replace battery cover.
	C 4	Replace clock module into stand (1) and
		turn clockwise to secure in place (2).
2	1