Philips DR-6000, DR-6050 manual Seconds Battery Empty, Demonstration Program

Page 7

12ENGLISH

C

C

C

Low Battery Indicator - The Numeric Display:

When the battery is running low, the plug symbol and the minutes indicator will blink after you have turned the razor OFF. If this occurs while shaving, you should have enough power to complete your shave. When you turn razor ON or OFF the display will come on for approximately 10 seconds.

-The Battery Display:

When the battery is running low, the plug and battery symbols will blink after you turn razor OFF. When you turn razor OFF or ON the display will stay on for approximately

10 seconds.

Battery Empty

To indicate that the battery power is too low to operate the razor,‘Lo’ appears on the display.

Demonstration Program

The razor has a demonstration program that will run through the display of razor functions. During the demonstration the razor will automatically turn ON and OFF 2 times. To activate, press and hold the ON/OFF button for approximately 6 seconds. After 3 seconds the lock symbol appears; keep the ON/OFF button pressed.Then release the button and the razor will continue through the demonstration program.You can interrupt the demonstration by pressing the ON/OFF button again.

ENGLISH 13

C Cleaning Indicator

The blinking faucet symbol will remind you that razor heads need to be cleaned.This happens after each shave.

C Replacement Head Indicator

Every year, depending on your shaving behavior, after turning the razor OFF, the replacement head symbol indicator starts to blink. It will remain visible for the next 7 shaves to remind you that with new shaving heads you will guarantee yourself optimal shaving performance.

You can reset the razor by pressing the ON/Off button for 3 seconds while the replacement head symbol is blinking. The symbol then disappears.

If you do not reset the razor, after 7 shaves the razor will automatically reset itself.

NOTE: If the display shows the word ‘CHECK’ and a blinking replacement head symbol and faucet symbol, clean the razor thoroughly before you continue shaving (see ‘cleaning’). After cleaning, if the word ‘CHECK’ and a blinking replacement head symbol and faucet symbol remain on the display, immediately replace the razor heads (see ‘replace the razor heads’).

Image 7
Contents 9170XL 9170XL Save These Instructions Table of Contents Easy Read LCD Display FeaturesAutomatic Cleaning Indicator Full 2-Year Warranty Day Money-Back GuaranteeLCD Display Battery DisplayEasy Read LCD Display Display provides the following informationDemonstration Program Seconds Battery EmptyTo set time To replace clock batteryCharge Meter Charging Stand ClockCharging plug converts 100 240V AC to less than 24V DC Before First UseCharging Placing or removing razor from charging standQuick Charge RechargingPut It To The Test & Shaving Tips Circular movements How To Shave With An Electric RazorBeard growth using both straight Personal Comfort ControlCleaning Razor Heads CleaningTrimming Once a Month Razor Heads Storage After Each Use TrimmerReplacing the razor heads Razor head check indicationAssistance AccessoriesReplacement Heads Travel LockFull TWO Year Warranty