34ENGLISH
Cleaning the Jet Clean Canister (1160XCC)
For optimal performance of the Jet Clean System, it is recommended that you empty the cleaning solution canister and thoroughly rinse the canister clean every 2 weeks.
1Place the Jet Clean System on a flat, level surface.
C2 Simultaneously press the buttons located
on both sides of the Jet Clean System
(1) and lift the appliance off the Jet Clean canister (2).
Always remove appliance from canister by lifting straight up. Do not tilt Jet Clean System.
C 3 Discard any remaining cleaning solution in the canister.
The cleaning solution can be safely poured down the sink as there are no harmful ingredients.
C 4 Simply rinse the canister with warm water. Wipe the canister with a towel or tissue to remove excess water.
C 5 Pour the Jet Clean Solution into the canister up to a level between the two lines located inside the canister.
ENGLISH 35
C 6 | Carefully lower the Jet Clean System |
| over the canister making sure the release |
| buttons snap back into position. |
Replacing the Shaving Unit
◗Replace the shaving unit once a year for optimal shaving results.
◗Replace damaged or worn razor heads with model RQ11 Philips Norelco razor heads only.
◗The individual shaving heads (cutters and combs) are NOT replaceable. Only the one- piece shaving unit can be replaced.
This razor/charging stand/Jet Clean System has no other
Maintenance
◗Always remove razor from the charging stand/ Jet Clean System before cleaning appliance.
◗Unplug the charging stand/Jet Clean System after charging/recharging or cleaning razor. The charging stand/Jet Clean System and razor may be wiped clean using a damp cloth.
◗Water from the tap should be on a warm setting to clean any washable parts.