Philips 1160X manual Before First Use, Charge Meter, Travel Lock, Remaining Battery Capacity Model

Page 8

14ENGLISH

C

Remaining Battery Capacity Model 1180X

-The remaining battery capacity is indicated by the number of charging lights that are on.

ENGLISH 15

Initially your razor may need to go through 2 or 3 full charge/recharge cycles before remaining battery capacity indicators begin to display your accurate battery power left.

Before First Use

Low Battery Indicator

C Model 1180X

-When the battery is almost empty (5 or less

shaving minutes left), the bottom charging light blinks orange. When you turn the razor OFF the bottom charging light continues to blink for a few seconds.

C Models 1160X, 1160XCC and 1150X -When the battery is almost empty (5 or less shaving minutes left), the plug symbol blinks. When you turn the razor OFF the plug symbol blinks for a few seconds.

NOTE:The displays of models 1160X, 1160XCC and 1150X look different, but work the same way.

Charge Meter (1180X)

Charge Meter monitors amount of remaining battery power available. Remaining battery capacity is based on the amount of power consumed shaving per minute and is dependent upon your skin and beard type, whether you use pre-shave lotion, and how often the trimmer is used.

Charge the razor before you start using it (see ‘Charging’). Make sure the razor is switched off before you start charging it.

Remove any sticker or protective foil from the Display before using razor.

Important

Only use the power cord and charging stand or Jet Clean System (model 1160XCC only) provided to charge the razor.

The power plug transforms 100-240V AC to less than 24V DC.

Travel Lock

The razor is equipped with a travel lock function. You can use the travel lock function when you are going to store the razor for a longer period or if you are going to take the razor with you when traveling. See ‘Travel Lock’ section for instructions on how to use this function.

Image 8
Contents 1180X 1160X 1160XCC 1150X 1180X/1160X/1160XCC/1150X Important Safety Instructions Table of Contents Features Jet Clean System Button Removable Cleaning Solution CanisterRazor Holder LowMulti-Level Display Display provides the following informationRemaining Battery Capacity Model Power plug transforms 100-240V AC to less than 24V DCBefore First Use Charge MeterCharging in the Charging Stand Charging Razor with Jet Clean System 1160XCCCharging How To Shave With An Electric Razor RechargingQuick Charge Put It To The Test & Shaving TipsPress the on/off button once to switch on the razor ShavingTrimming To Groom Sideburns and MoustacheDeactivating the travel lock Travel LockActivating the travel lock Cleaning Cleaning the Shaving UnitBottom of the shaving unit Supplied brushCleaning the Shaving Unit in the Jet Clean System 1160XCC Place the Jet Clean System on a flat, level surfaceJet Cleaning the Razor Extra-thorough cleaning method Place the retaining frame back onto the shaving head holder Cleaning the TrimmerLift the retaining frame out of the shaving head holder Cleaning the Jet Clean Canister 1160XCC MaintenanceDiscard any remaining cleaning solution in the canister Replacing the Shaving UnitAssistance Battery RemovalStorage Accessories Full Twoyear Warranty