20ENGLISH
Shaving
C1 Turn razor ON by pressing the on/off
button once. Shave against the direction of beard growth using both straight and circular movements.
The razor display will light up briefly (model 1180X only).
2Stretch your skin with your free hand so blades can lift and cut whiskers. Gently press razor to skin so the floating heads can follow the contours of your face.
DO NOT press too hard.Too much pressure can pinch the skin into the combs.
3Turn razor OFF by pressing the on/off button once.
The display lights up for a few seconds and then shows the remaining battery capacity (Model 1180X only).
4Clean the razor after each use (see chapter ‘Cleaning’).
C5 Put the Protective Razor Head Cap on the
razor to protect razor heads.
Wet Shaving
You can also use the razor on a wet face with shaving foam.
1Apply some water to your skin.
ENGLISH 21
2Apply shaving foam to your skin.
3Rinse the shaving unit under the tap to ensure that the shaving unit glides smoothly over your skin.
4Press the on/off button once to switch on the razor.
5Move the shaving heads in circular movements over your skin.
NOTE: Rinse the razor under the tap regularly to ensure that it continues to glide smoothly over your skin.
6Dry your face and thoroughly clean the razor after each use (see chapter ‘Cleaning’).
NOTE: Make sure you rinse all foam off the razor.
C7 Put the Protective Razor Head Cap on the razor to protect heads.
Trimming
To Groom Sideburns and Moustache:
C1 Pull the shaving unit straight off the razor. NOTE: Do not turn the shaving unit while you pull it off the razor.