30ENGLISH
The razor will stay in one position until the end of the drying program.
◗Do not press the ON/OFF button while the cleaning cycle is running. If this does occur, the cleaning cycle will stop and the razor holder will automatically move to the starting position.The cleaning cycle can be
◗If the power plug is disconnected before the cleaning cycle is complete, the razor holder will remain in its current position. Reconnect the plug into the outlet or Jet Clean System and the razor holder will automatically move to the highest position. The cleaning cycle can be
CNOTE: If the cleaning solution level drops below
the minimum level during the cleaning cycle, the ‘cleaning chamber empty’ symbol will blink and razor holder returns the razor to the starting position, stopping the cleaning cycle. Unplug Jet Clean System from the outlet, remove razor and refill canister (see “Preparing Jet Clean System for Use”).
8When the entire cleaning cycle is complete and the razor is hygienically clean, the razor will be raised to the starting position and the display on the razor will turn on indicating that the razor is (re)charging.
ENGLISH 31
C 9 | Pull the razor forward and lift razor from |
| Jet Clean System. |
◗ If the razor needs to be recharged, you can | |
| simply leave it in the Jet Clean System after |
| cleaning and the razor will automatically |
| recharge.The display on the razor will indicate |
| the razor is recharging. |
◗ You may store your razor in the Jet Clean | |
| System. Unplug from the outlet when |
| charging/cleaning is complete. |
Extra-thorough cleaning method
Do not mix up the cutters and combs as the shaving performance may be adversely affected for several weeks before optimal shaving performance is restored.
1 | Turn razor OFF. |
C 2 | Pull the shaving head holder off the |
| bottom part of the shaving unit. |
C 3 | Slide the green retaining frame in the |
| direction of the arrows indicated on the |
| retaining frame. |