10
Setup - Wrap-Around Panel
This section explains how to prepare your baby for a phototherapy treatment using the
The fiber optic panel must NOT be covered by anything except with the cover provided. Any other type of cover could cause a reduction in light intensity. The setup instructions must be followed exactly.
This panel provides full coverage around the baby’s torso.
1.Place a disposable or reusable cover onto the panel with the light emitting side of the panel facing the sheer side of the cover.
hook and loop tabs
2.Place the covered panel under the baby’s torso, positioning it so it is under the baby’s armpits.
3.Wrap the panel around the baby. Use the tape or hook and loop tabs to secure the panel around the baby.
4.If the disposable cover becomes soiled, discard it and replace with a clean one. The cloth cover may be washed with mild soap and water.
NOTES
For a larger or more active baby, you may want to tape the panel to the baby’s diaper.
To be sure the panel is not wrapped too tightly, insert your finger between the panel and the baby’s body. Your finger should fit easily.
You may wrap the baby in a blanket or put the baby in a sleeper.
WARNING
If using tape to secure the panel, do not adhere the tape to the baby’s skin.
BiliTx Parents’ Manual
Positioning the fiber optic panel
Wrapping and securing the panel