BiliTx
parents’ manual
5. Troubleshooting
The following is a list of problems that may occur while using the BiliTx system. For additional information, contact your home care provider or contact Philips Children’s Medical Ventures Customer Service at
WARNING
If therapy is interrupted for one hour or longer, resume therapy as soon as possible and contact your home care provider.
Problem |
| Reason/Action |
Therapy On/Off | button is not | Check to make sure power cord is properly attached and |
green |
| plugged into an active electrical outlet. |
|
| Ensure the device is turned on. |
Therapy On/Off | button is not | If the power cord is properly attached and plugged into an |
flashing green |
| active electric outlet and the Therapy On/Off button is not |
|
| flashing green, but the device will turn on, continue to use the |
|
| device for therapy. |
Light is not being emitted from | Check to make sure panel is securely locked into Illuminator | |
fiber optic panel |
| device. |
Yellow LED is flashing | Ensure the panel or circuit support adapter is securely locked | |
|
| into place. If light continues to flash, contact your home care |
|
| provider. |
Loss of power or light source | Contact your home care provider. | |
failure |
|
|
Device will not turn off when | Press and hold the Therapy On/Off button for 3 seconds. | |
the Therapy On/Off button is |
| |
pressed |
|
|