Weekday Alarm Setting, Single Alarm Setting

* Pre-Alarm

If the remote temperature (channel 1) is 32˚F or below, the pre-alarm feature will be activated. The pre-alarm time interval can be set for 15, 30, 45, 60, 75 or 90 minutes before the weekday or single alarm time.

This alarm will only sound if either the weekday or single alarms are armed. This can help you to avoid delays caused by icy conditions by waking you earlier in case of a potential ice or snow. This alarm can be bypassed during the set up if you choose not to use it. If the calendar is displayed, press ALARM ON/OFF to display the weekday alarm. Each press on ALARM ON/OFF button will display the next available alarm in the sequence of Weekday alarm, Single alarm and Pre-alarm.

Press MODE to return to the calendar display mode.

WEEKDAY ALARM SETTING

1. Press to view the previous weekday alarm time and arm the alarm.

2. Press to disarm the weekday alarm and have the display read “OFF”.

3.When the weekday alarm time is displayed, press and hold ALARM ON/OFF for 3 seconds;


4.	The alarm hour digit will flash, then press		or	to
5.	adjust the desired hour.
5.	Press ALARM ON/OFF again, the alarm minute digit
	will flash, then press or	to adjust the desired minute.
	will flash, then press or	to adjust the desired minute.

6.Press ALARM ON/OFF again and the weekday alarm is set with the icon “W ” on the display.

SINGLE ALARM SETTING

Press ALARM ON/OFF to select the single alarm. If the alarm is disarmed, the alarm time will be displayed as “OFF”. If you choose not to set the SINGLE ALARM press ALARM ON/OFF again to advance to the PRE-ALARMsetting procedure.

1.Press to view the previous single alarm time and arm the alarm.

2. Press to disarm the single alarm and have the display read “OFF”.

3.When the single alarm time is visible, press and hold ALARM ON/OFF for 3 seconds;

4.	The alarm hour digit will flash, then press	or	to
5.	adjust the desired hour.
5.	Press ALARM ON/OFF again, the alarm minute digit

will flash, then press or to adjust the desired minute.

6.Press ALARM ON/OFF again and the single alarm is set with the icon “S ” on the display.

PRE-ALARM SETTING

Press ALARM ON/OFF to select the pre-alarm. If alarm is disarmed, the alarm time will be displayed as “OFF”. The pre-alarm can be set only if the weekday alarm or the single alarm is set. If you choose not to set the PRE-ALARMpress ALARM ON/OFF again to exit the setting procedure.

1.Press to view the previous pre-alarm time and arm the alarm.


2.	Press	to disarm the pre-alarm time and have the


3.	display read “OFF”.
	When the pre-alarm time is displayed, press and hold
	ALARM ON/OFF for 3 seconds;
4.	The minute digit will flash, then press		or	to adjust
	the desired pre-alarm period in the sequence of 15, 30,
	45, 60, 75, 90 minutes.

5.Press ALARM ON/OFF again and the pre-alarm is set with the icon “PRE-AL” on the display.