^2Joystick
Use this joystick to manually operate cameras, camera site accessories and a recorder, or to move the cursor in SETUP MENU on the active monitor screen.
}: Up
{: Down
[: Left, rewind*, backward field advance*
]: Right,
^3Top button
Pressing this button will automatically set the lens focus of a specified camera.
^4Iris buttons (IRIS CLOSE/OPEN)
Close or open the lens iris of cameras equipped with the specified lens.
Press the CLOSE and OPEN buttons simultaneously. The lens iris is reset to the factory default setting.
^5Focus buttons (FOCUS NEAR/FAR)
Adjust the lens focus of cameras equipped with the specified lens.
Press the NEAR and FAR buttons simultaneously. The lens focus is adjusted automatically, if the specified auto focus camera is equipped.
^6Zoom buttons (ZOOM WIDE/TELE)
Press these buttons to zoom the lenses equipped with the specified cameras.
Press the WIDE and TELE buttons simultaneously dur- ing the recorder mode. The recording is started.
^7Call Preset button (CALL PRESET/PROGRAM
PRESET)
To call the selected camera’s preset position, press this button in combination with the numeric buttons. (The specified cameras support this function.)
To program a preset position, press the corresponding numeric button(s), and then press this button while holding down the SHIFT button.
^8Auto Pan button (AUTO PAN/CAM FUNC)
Activates the auto panning function of cameras equipped with this feature.
To execute camera functions, press this button in com- bination with the numeric buttons. (The specified cam- eras support this function.)
^9Clear button (CLEAR/LOG OUT)
Use this button to clear numeric input on the LED dis- play, or exit from the ALARM HISTORY table, the VIDEO LOSS HISTORY table, or the SYSTEM STATUS table.
To logout of the system, press this button while holding down the SHIFT button.
&0Camera (Set) button [CAM (SET)/WIPER]
CAM: To select a camera, press the corresponding numeric button, followed by this button.
SET: To enter numeric input, such as operator ID and password, press this button in combination with the numeric buttons.
Also use this button to execute the currently high- lighted selection and go into a submenu of SETUP MENU.
WIPER: To turn on the housing wiper of the camera, press this button while holding down the SHIFT but- ton.
&1Numeric buttons
Press these buttons to enter numbers into the system such as the camera and monitor number, sequence number, preset position, etc.
•In combination with the OSD button, parameter selection in OSD
•In combination with the SHIFT button, AUX and Defroster are available.
•In combination with the SHIFT button, electronic zooming and multiscreen sequence, etc. are avail- able.
&2Monitor (Escape) button [MON (ESC)/MON LOCK]
MON: Press this button to select a monitor.
To select a monitor, press the corresponding numeric buttons, followed by the MON (ESC) but- ton.
ESC: Press this button to escape from the currently highlighted selection and return to the previous page of SETUP MENU.
MON LOCK: To prevent other operators from control- ling the monitor, press this button while holding down the SHIFT button. To release the lock, press this button while holding down the SHIFT button again.
&3Alarm Reset button (RESET/ALL RESET)
RESET: To reset an alarm activated in the currently active monitor, press this RESET button.
ALL RESET: To cancel all activated alarms at a time, press this button while holding down the SHIFT but- ton.
&4Alarm Acknowledge button (ACK/SUSPEND)
ACK: Acknowledges an activated alarm.
To select the alarm monitor, press the ALARM but- ton.
To select the desired alarm action number, press the numeric buttons, then press this ACK button. "ACK" will appear on the monitor.
To reset the alarm, press the RESET button after acknowledging the alarm. "ACK" will go out.
30