CAMERA CONTROL

Buttons and control for cameras or camera site accessories are located on the right side of the front panel of the system controller.

Included are zoom control, focus control, iris control, preset and pan/tilt controls.

Normally, combination cameras equipped with the specific feature or a WV-RC100 or WV-RC150 Receiver are required to utilize these functions.

Note: Refer to the cameras' operating instructions whether to confirm that each function is available.

Lens Control

This function is available when specified lens, with motor- ized zoom/ focus functions, is mounted on the camera, and the lens selection (DC/VIDEO) on the camera is set to DC.

1.Select the desired monitor and camera. (Refer to p. 90 Monitor Selection and p. 91 Camera Selection.)

2.Press the FOCUS NEAR/FAR buttons while watching the monitor. The lens focus is adjusted to obtain a sharply focused image.

To set the lens focus automatically, press these buttons simultaneously.

FOCUS

NEAR

 

 

 

FAR

 

 

 

 

 

AUTO FOCUS

Pressing the top button of WV-CU360CJ can also set the lens focus automatically.

Top button

3.Press the ZOOM WIDE/TELE buttons while watching the monitor. The lens iris is adjusted to obtain the desired image.

Press the TELE button to bring an object optically clos- er. Press the WIDE button to widen the scene optically.

ZOOM

WIDE

 

 

 

TELE

 

 

 

 

 

REC

Moving the zoom wheel controller of WV-CU360CJ can also adjust the lens zoom.

WIDETELE

Zoom wheel controller

4.Press the IRIS CLOSE/OPEN buttons to close/open the lens iris. The lens iris is adjusted by these buttons to obtain the proper image exposure.

IRIS

CLOSE

 

 

 

OPEN

 

 

 

 

 

AUTO IRIS

To reset to the factory default setting, press these but- tons simultaneously.

Pan/Tilt Control

Manual Operation

1.Select the desired monitor and camera. (Refer to p. 90 Monitor Selection and p. 91 Camera Selection.)

2.Move the joystick to move the pan/tilt head towards the desired direction.

UP

LR

DOWN

Auto Panning

1.Select the desired monitor and camera. (Refer to p. 90 Monitor Selection and p. 91 Camera Selection.)

2.To activate the auto panning function of the selected camera, press the AUTO PAN button.

AUTO PAN

CAM FUNC

3. To cancel the auto panning function, move the joystick.

92

Page 90
Image 90
Panasonic WJ-SX 150 manual Camera Control, Lens Control, Pan/Tilt Control, Manual Operation, Auto Panning