123, To Operate the Multiscreen Display | Panasonic WJ-SX 150

TIME-LAPSE VCR CONTROL [NON-PANASONIC MODELS] (TERMINAL MODE)

A time-lapse VCR is operable with the system controller, while connecting to the matrix switcher.

Notes:

•Before the use, it is necessary to install the Multiplexer board in the matrix switcher, connect the matrix switcher to the digital disk recorder, and configure the system through WJ-SX150 Administrator Console, OSD SETUP MENU, and time-lapse VCR's SETUP MENU. [Refer to p. 34 Installing the Multiplexer Board, p. 46 Connection with the Time-lapse VCR (Non-Panasonic Models), p. 52 WJ-SX150 SETUP MENU (OSD), and p. 64 WJ-SX150 ADMINISTRATOR CONSOLE.]

•You cannot display the setup menu of a time-lapse VCR.

•You cannot control non-Panasonic time-lapse VCRs from PS·Data system controllers.

The following is the procedure of a non-Panasonic model time-lapse VCR.

■Controlling the Time-lapse VCR

●To Operate the Multiscreen Display

The operations are the same as WJ-HD500 Series. Refer to p. 117 Multiscreen Segment Switching.

●Manual Recording

Refer to the time-lapse VCR’s operating instructions for how to operate.

●Normal Playback

1.Enter the recorder mode. (Refer to p. 116 Recorder Mode.)

2.Do the playback procedure using the buttons on the front panel. (Refer to the time-lapse VCR’s operating instructions for how to operate.)

3.Press the PLAY button. The playback image will appear on the monitor.

4.To display the spot picture, press the numeric buttons corresponding to the desired camera number, then press the CAM [SET] button. Then, the active monitor number with “-H**” (** is the camera number)” will appear on the LED display. (Refer to p. 117 Normal Playback for the illustration.)

●Fast-forward

Refer to the time-lapse VCR’s operating instructions for how to operate.

●Rewind

1.During the stop, press the REW button to rewind the tape.

2.Press the STOP button to stop rewinding.

Note: Pressing the PLAY button during rewind will start playback.

123

Image 119

Panasonic WJ-SX 150 manual 123, To Operate the Multiscreen Display

Contents

Operating Instructions English Version Important Safety Instructions Contents When Using a PS·DATA System Controller Camera Site Accessories ControlAlarm Control Operating Procedures PS·DATA Preface Features Do not attempt to disassemble the appliance PrecautionsDocument Convention Do not drop metallic parts through slots Features of the Matrix Switcher System Spot Mode Matrix Switcher System DescriptionsCrosspoint Switches Monitoring Mode Camera control Sequence ModeSystem Control About System Controller Example of a System with Basic Functions Monitor Operator Registration Terminal Mode DescriptionsLog-in/Log-out Priority Lock Monitor-related FunctionsMonitor Selection Display Position Camera Selection Operating Zoom Lens Housing ControlCamera-related Functions Multiscreen Display 4, 9, and 16 Screens Controllable Camera-related Functions Alarm-related FunctionsCamera Cleaning External Equipment Control Timer Event Recorder Connection Setup ProceduresSystem Status Table Extended Functions Still display Alarm priority modeMultiplexer Board Function Multiscreen display Motion Detector Digital Disk Recorder WJ-HD100 Series/Time-lapse VCR Notification about PS·DATA Controller Operation Detailed Product Description Multiplexer Software Upload WJ-SX150 Matrix SwitcherFront View SX150 Software Upload Rear View WV-CU360C System Controller Terminal Mode Preset $6Recorder button Recorder 2Setup button Setup$4Next button Next $5Previous button Prev WV-CU360CJ System Controller Terminal Mode 2Joystick 7Call Preset button Call PRESET/PROGRAM3Alarm Reset button RESET/ALL Reset 4Alarm Acknowledge button ACK/SUSPEND 7Group Sequence button Group SEQ 5Function 1 button F1/CAM Setup7Setup button Setup 6Tour Sequence button Tour SEQ 1DC 9V Input jack DC 9V 8Controller Number switch Controller No9Mode Selection switches Mode Data ports Data Installations and System Connections Mounting into the Rack InstallationsInstalling the Multiplexer Board Connection with Digital Disk Recorder WJ-HD500 Series System Connection ExamplesBasic System Connection System Expansion Connection Camera Max Camera Inputs Alarm Inputs Connection with the Camera Sites Connections RS485 Port Home Run WiringDaisy Chain Wiring Connections for RS-485 Type Camera Connection with the Monitors DATA1 to DATA4 Port Connection with the Alarm SensorsConnection with the System Controllers To Confirm the Images from a Recorder Connected to the Unit Connection with the Alarm OutputConnection with Digital Disk Recorder WJ-HD500 Series EXT To Record the Camera Images in Maximum Recording Rate EXT Monitor OUT To Control a Recorder via the Network Data HDR Port Connection with Digital Disk Recorder WJ-HD100 SeriesData HDR Port Data bit 8 bits Parity check None Stop bit 1 bit Parity check ODD Stop bit 1 bit Connection with the Time-lapse VCR Panasonic Models Connection with the Time-lapse VCR Non-Panasonic Models Cable Specifications Connection with the PC Time Adjustment with an External EquipmentCable Specifications Master Clock Connection Example for Time Adjustment WJ-SX150 Setup Procedures Schedule Settings Setup ProceduresDescription of Setup Procedures Sequence Settings WJ-SX150 Administrator Console Configuration Operator SettingsSystem Settings Setup File Operation Numeric buttons Enters numerals WJ-SX150 Setup Menu OSDDisplaying Setup Menu Programming Setup Menu Day How to DisplayParameters Month · D. S. T.... Summer Time Minute T. Daylight Saving TimeYear Time Dwell Alarm ModeAlarm Event Serial Port Alarm Input CameraAlarm Port MUX Motion DET Camera Title How to edit Recorder Unit Address Recorder ControlWithout the Multiplxer board With the Multiplexer board Serial Port Speed RS485 Camera SetupDATA4/PSD Port Select PSD/HDR Port Speed Priority Camera CleaningPassword Operator no Dummy Black AlarmNormal Dynamic REC Installation/Uninstallation WJ-SX150 Administrator ConsoleDescription of WJ-SX150 Administrator Console Startup/Termination Main Window Recorder OK button Cancel Exit buttonPut a File to SX150 Unit Address Cam Get a Configuration Data from SX150Preset Tour Sequence Group Sequence Action Group EnableSchedule Mode Group Daylight Saving Time/Summer Time Camera CleaningCamera Auto Cleaning Auto Cleaning Camera Camera Alarm ModeAlarm Input Group Sensitivity Serial Port Alarm Port Alarm Event Operator Registration Monitor Selection Level Table Time & Date Auto Login/Logout Auto Log-in/Log- out Parameters How to displayCable Compensation/VD2/DATA Clock Edit Camera Title Camera Title To Delete a Character Edit Font WindowTo Edit a User Font Character To Copy a Character Fixed Common Parameter Group Data PortRS-485 Port Group REC OUT Group Multiplexer ModeHow to Display Parameters Multi Monitor Out Group System Group Mux Alarm GroupAlarm Group Multiplexer Title How to Display Select Setup Data File Edit Account Manager Account Manager Fixed Parameter Group Communication PortParameter Group Operating Procedures Terminal Mode Log-in LOG-IN and LOG-OUT Auto Log-out Log-outAuto Log-in Releasing Priority Lock Monitor Selection and Camera SelectionPriority Lock Applying Priority Lock Camera Selection Manual Operation Camera ControlLens Control Pan/Tilt Control Call Preset Position Program Preset Position Camera Function Shortcut Function Camera SetupCamera Function Control Patrol Learn and Play Changing to Black and White Images Camera Panning Function Auxiliary Control Camera Site Accessories ControlCamera Housing Control Receiver Control Running Sequence On-screen Display OSD Position Control Monitor Display ControlOn-screen Display OSD Control Moving All the Items 100Moving the Event Display Moving the Monitor Status Video Loss History Table Alarm History Table101 102 Alarm ControlOperating during an Alarm Mode Operation of an Alarm-related Camera ACK 103 Resetting the Alarm InputsSuspending the Alarm Inputs Alarm Reset Alarm All Reset Monitoring the Camera Picture Multiplexer Operations104 Electronic Zooming EL-ZOOM 105 107 108 When Using a PS·DATA System Controller 109 Monitor Control 110 111 112 Operation during an Alarm ModeResetting All the Alarm Inputs Suspending All the Alarm Inputs Controlling the Unit with a PS·Data System Controller 113 115 Expanded Function 116 WJ-HD500 Series Control Terminal ModeDisplaying WJ-HD500 Series Setup Menu Recorder Mode Normal Playback 117 Search Playback 118Manual Recording Other Operations 119 Controlling Digital Disk Recorder WJ- HD100 Series WJ-HD100 Series Control Terminal ModeDisplaying WJ-HD100 Series Setup Menu 120 Date-and-time entry form Alarm Recall table121 Fast-forward 122Controlling the Time-lapse VCR To Operate Multiscreen Display To Operate the Multiscreen Display 123 Controlling the Recorder with a PS·Data System Controller WJ-HD500 Series Control PS·DATA124 125 WJ-HD100 Series Control PS·DATA 126 TIME-LAPSE VCR Control PS·DATA Video Loss Display Monitor Display When a Video Loss OccursCamera Switching Pulse Loss Display 127 128 Troubleshooting 129 130 131 Appendix 132 Transmission CommandResponse Command Communication Protocol Basic Operation Command Table 134 Alarm ControlSetup Control PAN/TILT 135 136 Setup Menu Recorder Control 137 REW 138 Inquiry 139 Miscellaneous Control 140 141 Error Code ListMatrix switcher and external devices Team Work Worksheets142 Instruction Tour Sequence Checklist143 Recorder Group Sequence 144 Daylight Saving Time Timer EventCamera Auto Cleaning 145 146 Alarm ModeAlarm Event Alarm Port Level Table 147 Cable Compensation/VD2 148Auto Log-in/Log-out Data Port 149 ALM 150 151 SpecificationsStandard Accessories Panasonic Digital Communications & Security Company