• Year
Press the numeric button to enter the correct year.
• TIME
Press the numeric button to enter the correct time.
• MINUTE
Press the numeric button to enter the correct minute.
• AM/PM
Press the NEXT or PREV button to select the correct time. After the configuration, press the SETUP button while hold- ing down the SHIFT button. The configuration will be updat- ed when closing SETUP MENU.
Notes:
•Adjust the time and date when the clock display is differ- ent from the current one.
•The clock display pattern is changeable with the setting in
•The clock is automatically adjusted to 0 second of the set- ting time and date when closing SETUP MENU.
•Hour system (12- hours or 24- hours) is changeable through
■D. S. T. (Daylight Saving Time)
| x.xx/x.xx | ||
100 | TIME&DATE | Aug/21/2002 10:55 AM | |
200 | D.S.T. | ON |
|
300 | SEQUENCEO |
|
|
400 | ALARMO |
|
|
500 | CAMERA TITLEO |
|
|
600 | RECORDERO |
|
|
700 | SYSTEMO |
|
|
800 | OPERATOR REGISTRATIONO | ||
900 | MULTIPLEXERO |
|
|
1000 | MUX CAMERA TITLEO | ||
|
|
|
|
●How to Display
To display this menu on the monitor, move the cursor to 200 D. S. T. in SETUP MENU by moving the joystick to ▼ or ▲.
●Parameters
Select ON or OFF by pressing the NEXT or PREV buttons.
ON: Daylight saving time is activated.
OFF: Daylight saving time is deactivated.
The factory default setting is ON.
After the configuration, press the SETUP button while hold- ing down the SHIFT button. The configuration will be updat- ed when closing SETUP MENU.
Note: The start/end date are configurable through WJ- SX150 Administrator Console. (Refer to p. 71.)
■SEQUENCE SETUP
300 SEQUENCE |
|
|
|
|
| ||||
| TOUR NO. = |
|
|
|
|
|
|
| |
| 1 |
|
|
|
|
| |||
STEP CAM | PRE DWELL | STEP CAM | PRE DWELL | ||||||
1 | 1 |
|
| 2S | 9 | 9 | 2S | ||
2 | 2 |
|
| 2S | 10 | 10 | 2S | ||
3 | 3 |
|
| 2S | 11 | 11 | 2S | ||
4 | 4 |
|
| 2S | 12 | 12 | 2S | ||
5 | 5 |
|
| 2S | 13 | 13 | 2S | ||
6 | 6 |
|
| 2S | 14 | 14 | 2S | ||
7 | 7 |
|
| 2S | 15 | 15 | 2S | ||
8 | 8 |
|
| 2S | 16 | 16 | 2S | ||
|
|
|
|
|
|
|
|
|
|
●How to Display
To display this menu on the monitor, move the cursor to 300 SEQUENCE in SETUP MENU by moving the joystick to ▼ or
▲.
Then, press the CAM (SET) button. The submenu appears on the monitor.
●Parameters
Move the joystick to move the cursor.
Press the NEXT or PREV button to select the desired para- meters.
Press the numeric button(s) to enter a number.
55
