
ALARM CONTROL
■Alarm Mode
When alarm (sensor) is accepted, the matrix switcher's operation mode changes to the alarm mode. Then, the sys- tem operates as follows:
•The camera image (alarm image) appears on the moni- tor.
In the factory default setting, the alarm inputs 1 to 16 are associated with the
•"ALARMnn" appears on the monitor.
The display indicates the image is input through the alarm nn (nn is the alarm number).
When more than one alarm signal input has been accepted, "ALARMnn*" appears on the monitor.
ALARM01
•Alarm output signals are supplied from Alarm Output 1 to 4 (#10, 11, 23 and 24) of the ALARM port
•The monitor and alarm number will appear on the LED display. At the same time, the alarm indicator will blink, the monitor indicator will light up, and the camera indi- cator will go out.
There are two operation mode when more than one alarm signal has been accepted by the unit that is assigned to the same monitor.
•Sequence mode: An alarm operation is replaced by another one after the dwell time ends.
•Hold mode: An initial alarm operation is continued even after another alarm input is accepted.
Notes:
•The association of the alarm inputs with cameras and monitors are changeable in SETUP MENU or
•Alarm input will be automatically reset in 30 seconds. The
■Operating during an Alarm Mode
While an alarm mode is active, the following are available from the system controller:
•Operating the camera with the alarm input (ACK)
•Resetting the alarm (RESET/ALL RESET)
•Suspending the alarm (ALM SUSPENDED)
■Operation of an Alarm-related Camera (ACK)
You can operate the camera with the alarm input as follows:
ACK | RESET |
|
|
|
|
SUSPEND | ALL RESET |
|
|
|
|
GROUP SEQ | TOUR SEQ | T&D | CAM ID | EVENT |
|
REW/FF | STILL | AUX1 OFF | AUX1 ON |
| |
PREV | NEXT | MON STATUS | ALL |
| ACK |
STEP |
| AUX2 OFF | AUX2 ON | ||
|
| ||||
| PAUSE | ALM H | VLD H | SYS S |
|
PLAY | PAUSE | SEQUENCE | DEF OFF | DEF ON |
|
OSD |
| MON (ESC) |
| CAM (SET) |
|
| SHIFT | MON LOCK | MULTI SCREEN SEL | WIPER |
|
1.Select a monitor which displays "ALARM".
2.Press the ACK button.
"ACK" will appear on the monitor with an alarm input. The camera with an alarm input will become operable.
3.Operate camera with the system controller. Pan/Tilt, zoom, focus, and iris are available.
When selecting another monitor, "ACK" will disappear from the display. The matrix switcher system will return to the alarm mode.